Understanding Log Messages

The following sections describe some of the most common types of log messages that can appear in a rippled server's debug log and how to interpret them.

This is an important step in Diagnosing Problems with rippled.

Log Message Structure

The following shows the format of the log file:

2020-Jul-08 20:10:17.372178946 UTC Peer:WRN [236] onReadMessage from n9J2CP7hZypxDJ27ZSxoy4VjbaSgsCNaRRJtJkNJM5KMdGaLdRy7 at 197.27.127.136:53046: stream truncated
2020-Jul-08 20:11:13.582438263 UTC PeerFinder:ERR Logic testing     52.196.126.86:13308 with error, Connection timed out
2020-Jul-08 20:11:57.728448343 UTC Peer:WRN [242] onReadMessage from n9J2CP7hZypxDJ27ZSxoy4VjbaSgsCNaRRJtJkNJM5KMdGaLdRy7 at 197.27.127.136:53366: stream truncated
2020-Jul-08 20:12:12.075081020 UTC LoadMonitor:WRN Job: sweep run: 1172ms wait: 0ms

Each line represents one log entry, with the following parts in order, separated by spaces:

1. The date the log entry was written, such as 2020-Jul-08.
2. The time the log entry was written, such as 20:12:12.075081020.
3. The time zone indicator UTC. (Log dates are always in UTC.)
4. The log partition and severity, such as LoadMonitor:WRN.
5. The log message, such as Job: sweep run: 1172ms wait: 0ms.

For simplicity, the examples in this page omit the date, time, and time zone indicator.

Crashes

Messages in the log that mention runtime errors can indicate that the server crashed. These messages usually start with a message such as one of the following examples:

Throw<std::runtime_error>

Terminating thread rippled: main: unhandled St13runtime_error

If your server always crashes on startup, see Server Won't Start for possible cases.

If your server crashes randomly during operation or as a result of particular commands, make sure you are updated to the latest rippled version. If you are on the latest version and your server is still crashing, check the following:

• Is your server running out of memory? On some systems, rippled may be terminated by the Out Of Memory (OOM) Killer or another monitor process.
• If your server is running in a shared environment, are other users or administrators causing the machine or service to be restarted? For example, some hosted providers automatically kill any service that uses a large amount of a shared machine's resources for an extended period of time.
• Does your server meet the minimum requirements to run rippled? What about the recommendations for production servers?

If none of the above apply, please report the issue to Ripple as a security-sensitive bug. If Ripple can reproduce the crash, you may be eligible for a bounty. See https://ripple.com/bug-bounty/ for details.

Already validated sequence at or past

Log messages such as the following indicate that a server received validations for different ledger indexes out of order.

Validations:WRN Val for 2137ACEFC0D137EFA1D84C2524A39032802E4B74F93C130A289CD87C9C565011 trusted/full from nHUeUNSn3zce2xQZWNghQvd9WRH6FWEnCBKYVJu2vAizMxnXegfJ signing key n9KcRZYHLU9rhGVwB9e4wEMYsxXvUfgFxtmX25pc1QPNgweqzQf5 already validated sequence at or past 12133663 src=1

Occasional messages of this type do not usually indicate a problem. If this type of message occurs often with the same sending validator, it could indicate a problem, including any of the following (roughly in order of most to least likely):

• The server writing the message is having network issues.
• The validator described in the message is having network issues.
• The validator described in the message is behaving maliciously.

async_send failed

The following log message indicates that StatsD export failed:

Collector:ERR async_send failed: Connection refused

This could mean:

• Your StatsD configuration has the wrong IP address or port.
• The StatsD server you were attempting to export to was down or not accessible from your rippled server.

Check the [insight] stanza in your rippled's config file and confirm that you have network connectivity from your rippled server to your StatsD server.

This error has no other impact on the rippled server, which should continue to work as normal except for the sending of StatsD metrics.

Check for upgrade

The following message indicates that the server has detected that it is running an older software version than at least 60% of its trusted validators:

LedgerMaster:ERR Check for upgrade: A majority of trusted validators are running a newer version.

This is not strictly a problem, but an old server version is likely to become amendment blocked. You should update rippled to the latest stable version. (If you are connected to devnet, update to the latest nightly version instead.)

Connection reset by peer

The following log message indicates that a peer rippled server closed a connection:

Peer:WRN [012] onReadMessage: Connection reset by peer

Losing connections from time to time is normal for any peer-to-peer network. Occasional messages of this kind do not indicate a problem.

A large number of these messages around the same time may indicate a problem, such as:

• Your internet connection to one or more specific peers was cut off.
• Your server may have been overloading the peer with requests, causing the peer to disconnect your server.

Consumer entry dropped with balance at or above drop threshold

The following log message indicates that a client to the server's public API has been dropped as a result of rate limiting:

Resource:WRN Consumer entry 169.55.164.21 dropped with balance 15970 at or above drop threshold 15000

The entry contains the IP address of the client that exceeded its rate limit, and the client's "balance", which is a score estimating the rate at which the client has been using the API. The threshold for dropping a client is hardcoded to a score of 15000 .

If you see frequent messages from the same IP address, you may want to block those IP addresses from your network to reduce the load on your server's public API. (For example, you may be able to configure your firewall to block those IP addresses.)

To avoid being dropped by rate limiting on your own server, connect as an admin.

InboundLedger 11 timeouts for ledger

InboundLedger:WRN 11 timeouts for ledger 8265938

This indicates that your server is having trouble requesting specific ledger data from its peers. If the ledger index is much lower than the most recent validated ledger's index as reported by the server_info method, this probably indicates that your server is downloading a history shard.

This is not strictly a problem, but if you want to acquire ledger history faster, you can configure rippled to connect to peers with full history by adding or editing the [ips_fixed] config stanza and restarting the server. For example, to always try to connect to one of Ripple's full-history servers:

[ips_fixed]
s2.ripple.com 51235

InboundLedger Want hash

Log messages such as the following indicate that the server is requesting ledger data from other servers:

InboundLedger:WRN Want: 5AE53B5E39E6388DBACD0959E5F5A0FCAF0E0DCBA45D9AB15120E8CDD21E019B

This is normal if your server is syncing, backfilling, or downloading history shards.

LoadMonitor Job

Messages such as the following occur when a function takes a long time to run (over 11 seconds in this example):

2018-Aug-28 22:56:36.180827973 LoadMonitor:WRN Job: gotFetchPack run: 11566ms wait: 0ms

The following similar message occurs when a job spends a long time waiting to run (again, over 11 seconds in this example):

LoadMonitor:WRN Job: processLedgerData run: 0ms wait: 11566ms
LoadMonitor:WRN Job: AcquisitionDone run: 0ms wait: 11566ms
LoadMonitor:WRN Job: processLedgerData run: 0ms wait: 11566ms
LoadMonitor:WRN Job: AcquisitionDone run: 0ms wait: 11566ms

These two types of messages often occur together, when a long-running job causes other jobs to wait a long time for it to finish.

It is normal to display several messages of these types during the first few minutes after starting the server.

If the messages continue for more than 5 minutes after starting the server, especially if the run times are well over 1000 ms, that may indicate that your server does not have enough disk I/O, RAM, or CPU. This may be caused by not having powerful enough hardware or because other processes running on the same hardware are competing with rippled for resources. (Examples of other processes that may compete with rippled for resources include scheduled backups, virus scanners, and periodic database cleaners.)

Another possible cause is trying to use NuDB on rotational hard disks; NuDB should only be used with solid state drives (SSDs). Ripple recommends always using SSD storage for rippled's databases, but you may be able to run rippled successfully on rotational disks using RocksDB. If you are using rotational disks, make sure both the [node_db] and the [shard_db] (if you have one) are configured to use RocksDB. For example:

[node_db]
type=RocksDB
# ... more config omitted

[shard_db]
type=RocksDB

No hash for fetch pack

Messages such as the following are caused by a bug in rippled v1.1.0 and earlier when downloading historical ledgers for history sharding:

2018-Aug-28 22:56:21.397076850 LedgerMaster:ERR No hash for fetch pack. Missing Index 7159808

These can be safely ignored.

Not deleting

Messages such as the following occur when online deletion is interrupted:

SHAMapStore:WRN Not deleting. state: syncing. age 25s

The state indicates the server state. The age indicates how many seconds since the last validated ledger was closed. (A healthy age for the last validated ledger is 7 seconds or less.)

During startup, these messages are normal and can be safely ignored. At other times, messages like this usually indicate that the server does not meet the system requirements, especially disk I/O, to run online deletion at the same time as everything else the server is doing.

Potential Censorship

Log messages such as the following are issued when the XRP Ledger detects potential transaction censorship. For more information about these log messages and the transaction censorship detector, see Transaction Censorship Detection.

Warning Message

LedgerConsensus:WRN Potential Censorship: Eligible tx E08D6E9754025BA2534A78707605E0601F03ACE063687A0CA1BDDACFCD1698C7, which we are tracking since ledger 18851530 has not been included as of ledger 18851545.

Error Message

LedgerConsensus:ERR Potential Censorship: Eligible tx E08D6E9754025BA2534A78707605E0601F03ACE063687A0CA1BDDACFCD1698C7, which we are tracking since ledger 18851530 has not been included as of ledger 18851605. Additional warnings suppressed.

rotating validatedSeq

This message indicates that online deletion has started running:

SHAMapStore:WRN rotating  validatedSeq 54635511 lastRotated 54635255 deleteInterval 256 canDelete_ 4294967295

This log message is normal and indicates that online deletion is operating as expected.

The log message contains values describing the current online deletion run. Each keyword corresponds to the value immediately following it:

When online deletion finishes, it writes the following log message:

SHAMapStore:WRN finished rotation 54635511

The number at the end of the message is the ledger index of the validated ledger at the time online deletion started, matching the validatedSeq value of the "rotating" message. This becomes the lastRotated value the next time online deletion runs.

If the server falls out of sync while running online deletion, it interrupts online deletion and writes a "Not deleting" log message instead of a "finished rotation" message.

Shard: No such file or directory

Log messages such as the following can occur when you have history sharding enabled:

ShardStore:ERR shard 1804: No such file or directory

This indicates that the server tried to start acquiring a new history shard, but it cannot write to the underlying file system. Possible causes include:

• Hardware failure of storage media
• The file system became unmounted
• The shard folder was deleted

Tip: It is generally safe to delete rippled's database files when the service is stopped, but you should never delete them while the server is running.

Unable to determine hash of ancestor

Log messages such as the following occur when the server sees a validation message from a peer and it does not know the parent ledger version that server is building on. This can occur when the server is not in sync with the rest of the network:

Validations:WRN Unable to determine hash of ancestor seq=3 from ledger hash=00B1E512EF558F2FD9A0A6C263B3D922297F26A55AEB56A009341A22895B516E seq=12133675

During the first 5 to 15 minutes after the server starts up, it is normal for it to be out of sync with the rest of the network and print messages such as these. If the server writes these messages long after starting up, it could indicate a problem. Common causes include unreliable network connections and insufficient hardware specs. This can also happen when other processes running on the same hardware are competing with rippled for resources. (Examples of other processes that may compete with rippled for resources include scheduled backups, virus scanners, and periodic database cleaners.)

[veto_amendments] section in config file ignored

Log messages such as the following occur when your rippled.cfg file contains a legacy [veto_amendments] stanza. The first time the server starts on version 1.7.0 or higher, it reads the stanza to set amendment votes; on later restarts, it ignores the [amendments] and [veto_amendments] stanzas and prints this message instead.

Amendments:WRN [veto_amendments] section in config file ignored in favor of data in db/wallet.db.

To resolve this error, remove the [amendments] and [veto_amendments] stanzas from your config file. For more information, see Amendment Voting.

View of consensus changed during open

Log messages such as the following occur when a server is not in sync with the rest of the network:

LedgerConsensus:WRN View of consensus changed during open status=open,  mode=proposing
LedgerConsensus:WRN 96A8DF9ECF5E9D087BAE9DDDE38C197D3C1C6FB842C7BB770F8929E56CC71661 to 00B1E512EF558F2FD9A0A6C263B3D922297F26A55AEB56A009341A22895B516E
LedgerConsensus:WRN {"accepted":true,"account_hash":"89A821400087101F1BF2D2B912C6A9F2788CC715590E8FA5710F2D10BF5E3C03","close_flags":0,"close_time":588812130,"close_time_human":"2018-Aug-28 22:55:30.000000000","close_time_resolution":30,"closed":true,"hash":"96A8DF9ECF5E9D087BAE9DDDE38C197D3C1C6FB842C7BB770F8929E56CC71661","ledger_hash":"96A8DF9ECF5E9D087BAE9DDDE38C197D3C1C6FB842C7BB770F8929E56CC71661","ledger_index":"3","parent_close_time":588812070,"parent_hash":"5F5CB224644F080BC8E1CC10E126D62E9D7F9BE1C64AD0565881E99E3F64688A","seqNum":"3","totalCoins":"100000000000000000","total_coins":"100000000000000000","transaction_hash":"0000000000000000000000000000000000000000000000000000000000000000"}

During the first 5 to 15 minutes after the server starts up, it is normal for it to be out of sync with the rest of the network and print messages such as these. If the server writes these messages long after starting up, it could indicate a problem. Common causes include unreliable network connections and insufficient hardware specs. This can also happen when other processes running on the same hardware are competing with rippled for resources. (Examples of other processes that may compete with rippled for resources include scheduled backups, virus scanners, and periodic database cleaners.)

We are not running on the consensus ledger

NetworkOPs:WRN We are not running on the consensus ledger

During the first 5 to 15 minutes after the server starts up, it is normal for it to be out of sync with the rest of the network and print messages such as these. If the server writes these messages long after starting up, it could indicate a problem. Common causes include unreliable network connections and insufficient hardware specs. This can also happen when other processes running on the same hardware are competing with rippled for resources. (Examples of other processes that may compete with rippled for resources include scheduled backups, virus scanners, and periodic database cleaners.)

See Also

• Concepts:
  • The rippled Server
  • Technical FAQ
• Tutorials:
  • Diagnosing Problems
  • Capacity Planning
• References:
  • rippled API Reference
    • rippled Commandline Usage
    • server_info method